In order to compensate for the heat expansion one side of the connector is mounted as a loose bearing. The given torques must be observed. The other side of the connector is to be mounted as a fixed bearing. A minimum distance of 4mm must be kept between the cable ladders. Electrical conductivity tested according to DIN EN 61537.
data sheet
Hot-dip galvanized, according to BS 729 (DIN EN ISO 1461)
| height | length | weight | |||
|---|---|---|---|---|---|
| WPC15-HDG | 150 mm | 600 mm | 1,91 kg |
Stainless steel, according to ASTM 304 / BS 304 S 3
| height | length | weight | |||
|---|---|---|---|---|---|
| WPC15-304 | 150 mm | 600 mm | 1,81 kg |
Stainless steel, according to ASTM 31 Ti / AISI 316 L, BS 320S17 / BS 316S11
| height | length | weight | |||
|---|---|---|---|---|---|
| WPC15-316 | 150 mm | 600 mm | 1,83 kg |
